Adjustable raking beams

Rake beams quickly adjust to set the rake wheels from 0 to 8 degrees to allow for more or less aggressive raking. The 0 degree setting is for dry crops and up to 8 degrees is used for short, wet, or matted-down crops. 

Durable wind boards keep hay from getting caught in the wheels and are standard on the WR54 Series Heavy-Duty, High-Capacity Wheel Rakes.

Free-floating rake wheels

The 152.4-cm (60-in.) rake wheels on the WR54 High-Capacity Wheel Rake float freely, thanks to individual dampening springs which are standard equipment. If more precise adjustment for the dampening and float of rake wheels is required, the optional bi-directional spring can be ordered.

The rake wheels may be lifted independently left or right, or both at the same time.

Master control

The master control system on the WR54 Series High-Capacity Wheel Rake allows the operator to control various rake-wheel functions with the flip of a switch.

Maximum raking width

The maximum raking width is 8.8 m (29 ft). The rake wheel beams may be angled independently. This allows the operator to do one sided raking if desired.

Rubber-mounted rake wheel teeth improve raking performance

Rubber-mounted teeth allow the rake beams to be tilted to match crop conditions for better raking performance.

Tandem wheels for smooth operation

The tandem wheels on WR54 Series High-Capacity Wheel Rakes provide added stability and a smooth, level operation across rough field conditions.

Transport locks

The overhead frame can be locked with chains to secure it for transport and storage.

The rake beams can be locked for easy transport and storage.

The rake wheels can be locked for safe transport and storage.

Windrow adjustment made easy with hydraulic remote

The windrow width of the WR54 Series can be adjusted hydraulically to a maximum of 182.9 cm (72 in.).

One hydraulic remote, along with the electrical control box, handles all the functions of the rake.

Open-center kit for WR5417 High-Capacity Wheel Rake

Use with tractors that have an open-center hydraulic system.