2025 John Deere 25A Flail Mower

Adjustable cutting height

The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.

Power take-off (PTO) drive shaft and gearbox

All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.

The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.

36 flail-knife rotor provides uniform distribution of pulverized material

A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:

• Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.

• Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
• Knives pivot at their mounting points to minimize damage if an obstruction is hit.

Tractor hookup

The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).

iMatch compatibility starts with serial number 644700.